|
Pressure Gas Tube
How it is working
You click to ATD Pressure Gas Tube, for a large representation on
the picture.
Inside the ATD-Pressure Gas Tube, the pressure of the CO2
charge gets consequent increased by activating the ATD-Pressure Gas Generator.
At a very pre-determined level, the Shear Disc blows and the released CO2-gas is directed by the Discharge Head exactly where
required.
There are 5 different typs of Pressure Gas Tubes with different achievements
and dimensions for the individual requirements available. With application 150 -
600 litres CO2 volume with blasting pressures between 1500
and 2700 bar are set free, depending upon used ATD-Pressure Gas Tube. The
response time amounts to approx. 40 ms.
How its been used
The ATD-Pressure Gas Tube is been used directly where the build-up occurs. As
the entry to the obstruction, ATD-Base sockets are installed i.e. on the steel
shell of the plant. Through the insertion hole, the ATD-Pressure Gas Tube will
be inserted into the build-up with the Discharge Head in safe distance behind
the refractory. Locked with the ATD-Grip Case to the ATD-Base, the ATD-Tube is
breaking up the deposits by the strong release of its CO2-charge.
learn more
|
| Hotline:
+49 231 967866 0
Notice to our worldwide
visitors:
The ATD-Company-Office
can be reached during the
regular German office-hours:
Monday - Thursday from 9:00
am until 4:00 pm, Friday
from 9:00 am until 1:00
pm.
Our actual local
time is:
|
|
ATD-Pressure-Gas-System-Cardox
Show animation
|
|
Your
personnel will be trained
and certified by ATD - technicans
in using the ATD - Pressure
Gas System - Cardox.
|
|
